Banner Poles

Standard Post Mounted Banner System

The post banner system comprises of a heavy gauge aluminium pole to which the banner is sleeved. The pole is secured into a steel electroplated bracket with a removable plated locking pin. Plastic collars retain the banner from both sides (see our table below for safety limitations to size of banner).

These types of banner poles are ideal for local authority, when using promotional full colour PVC banners.

Post Mounted (without fixings)

Comprises of a heavy gauge aluminium pole to which the banner is sleeved.

• 2 heavy gauge aluminium 27mm diameter poles, mill finished (silver)
• 5mm wall thickness for strength
• 2 electroplated (silver) brackets/spigots
• Back-plate designed for use on round lamp columns or similar vertical supports (from 75mm-150mm diameter)
• Projecting spigot 100mm approx
• 2 galvanised locking pins
• 2 plastic collars
• 2 plastic end bungs
• Fitting instructions included
• The banner can be fitted on its own or in pairs
• Back-plate fixed by means of banding or our reusable stainless steel Sign-Torque clips

Wall Mounted (with fixing)

Comprises of a heavy gauge aluminium pole to which the banner is sleeved and connected to the wall

• 2 heavy gauge aluminium 27mm diameter poles, mill finished (silver)
• 5mm wall thickness for strength
• 2 electroplated (silver) steel back-plates/spigots
• Back-plate size 75mm wide, 130mm long, 5mm thick
• Projecting spigot 100mm approx
• Back-plate pre-drilled, 4 holes M8 size
• 8 off M8 70mm Sleeve anchor bolts
• 2 off galvanised locking pin
• 2 off plastic collars
• 2 off plastic end bungs
• Neatly boxed with fitting instructions included